本文へスキップ

DIGITECH CO., LTD. is the manufacture and sale manufacturer of various types of load testing machine, which specializes in the load measurement.

　　　　

Automatic Multi Force AnalyzerMODEL FWT series

  • FWT series is a gate-type high-load test machine equipped with all the features of our FT-501 model.
  • AC servo motors and positioning control using a precision ball screw is in addition to the seven stages smooth variable control in the adoption of the jog shuttle controller, positioning step control of 0.01mm・0.10mm・1.00mm can be selected with a hand while looking at the test article.
  • You have to place easy to see the measurement data, such as adopting graph waveform and the maximum load value-breaking value the 8.4-inch touch panel on the display device.
  • Test results printed in the internal organs printer and displays on the screen perform the aggregation on the basis of the also possible.

FWT Specification

Specification / Model FWT-100 FWT-200 FWT-500
Capacity 1kN（100kgf） 2kN（200kgf） 5kN（500kgf）
Minimum load display digits 100mN（10gf） 1N（100gf） 1N（100gf）
Length Resolution 0.01mm 0.01mm 0.01mm
Test speed 0.1～600mm/min 0.1～600mm/min 0.1～600mm/min
Maximum measurement length 700mm 700mm 700mm
Display and operation 8.4-inch color touch panel, jog shuttle controller
Load accuracy Within ± 0.5% of indicated value
Transportation Precise ball screw / servo motor
Protection circuit Upper and lower limit switch (optional setting method), overload stop, emergency stop switch
table size 200×200mm 200×200mm 200×200mm
Communication method USB1.1 USB1.1 USB1.1
size W770×H1342×D390 W770×H1342×D390 W770×H1342×D390
Weight approx.160kg approx.160kg approx.160kg
Power source AC100 or 220V AC100 or 220V AC100 or 220V
Specification / Model FWT-1000 FWT-2000
Capacity 10kN（1000kgf） 20kN（2000kgf）
Minimum load display digits 1N（100gf） 10N（1kgf）
Length Resolution 0.01mm 0.01mm
Test speed 0.1～600mm/min 0.1～600mm/min
Maximum measurement length 1000mm 1000mm
Display and operation 8.4-inch color touch panel, jog shuttle controller
Load accuracy Within ± 0.5% of indicated value
Transportation Precise ball screw / servo motor
Protection circuit Upper and lower limit switch (optional setting method), overload stop, emergency stop switch
table size 250×250mm 250×250mm
Communication method USB1.1 USB1.1
size W870×H1770×D390 W870×H1770×D390
Weight approx.200kg approx.220kg
Power source AC100 or 220V AC100 or 220V

※Specifications are subject to change without notice.

FWT CHARACTERISTIC.

  • And detecting a load data make your exact pressurization of minimum 0.01mm unit can be up to 10 stages of the displacement setting.
  • Up to 10 stages of the load setting the can any pressure to precisely control, detects the displacement data, such as the amount of deformation of the test article.
  • Fine behavior set by the load and displacement can be a compression test, tensile test and strength test and break test, insertion test or the like can be tested with a high degree of accuracy.
  • You can capture the display to measure the contents of the standard judgment bar graphs and waveform data visually
  • Macro calculation formula arbitrarily capture, you can automatically calculate a variety of test results from the measured waveform data.
  • Adopted at hand manual control of the testing machine in JOG Shuttle controller, the start of the test, you can stop.
  • Japanese, English, Korean, Simplified Chinese, it also can introduce immediately to the language can be switched in different production bases in Traditional Chinese.
  • Corresponding to the high-speed communication with a PC with a USB adoption. Software testing machine control and various data processing options are available.
dtg-top2"

【Option】

Stretching jig, you can the jig to suit such as the test content compression jig by suggestions.